[GROUP] CABOS DE VELAS MAGNECOR
[GROUP] CABOS DE VELAS MAGNECOR
Estou comprador de cabos de velas visto os meus estarem bem velhitos... Alguem quer alinhar ou tem melhor sugestão?
http://www.part-box.com/advanced_search ... &x=17&y=13
For 1 set Item No.40103 8.0mm (51.6£+17.25€portes) = 68.85£ 78.1EUR
For 5 or more Item No.40103 8.0mm (£45.86+8.05£portes) = 53.91£ 61.2EUR
http://www.part-box.com/product_info.ph ... s_id=14410
For 1 set Item No.45103 8.5mm (£62.2+17.25portes) = 79.45£ 90.13EUR
For 5 or more Item No.45103 8.5mm (£55.24+8.05portes) = 63.29£ 71.8EUR
OS VALORES FINAIS JÁ INCLUEM:
-DESCONTO VIP
-VAT (IVA)
-PORTES INCLUIDOS (para mim Lisboa)
*neste caso nao da pa fugir aos portes...
So7urno OK
nunoturbo OK 72€ OK enviado via emanuel
dariod-4d OK 71.8€ (por enviar)
emanuelae86 OK 75€ OK enviado
buda OK 72€ OK (pessoalmente)
crgod OK 71.8€ OK (pessoalmente, entregue, obrigado pelo burguer!)
RS1800 OK 71.8€ OK (pessoalmente)
RT OK 80.45€ ilhas OK enviado
rui machado (buda) OK 71.80€ OK (pessoalmente)
Ayrton_Senna OK 175,00 (+camberplates) OK enviado
10 kits magnecor 8.5mm !
ja mandei email para me confirmarem preço final total.. assim que tiver resposta começo a mandar pm's para o pessoal transferir o guito. (por favor coloquem detalhes para eu saber quem é quem qd for ao extracto lol)
tb não me esqueci da questão do kit ter 4 ou 5 cabos.
pff sejam pacientes vai demorar entre 2 a 3 semanas até os cabos chegarem a mim.
http://www.part-box.com/advanced_search ... &x=17&y=13
For 1 set Item No.40103 8.0mm (51.6£+17.25€portes) = 68.85£ 78.1EUR
For 5 or more Item No.40103 8.0mm (£45.86+8.05£portes) = 53.91£ 61.2EUR
http://www.part-box.com/product_info.ph ... s_id=14410
For 1 set Item No.45103 8.5mm (£62.2+17.25portes) = 79.45£ 90.13EUR
For 5 or more Item No.45103 8.5mm (£55.24+8.05portes) = 63.29£ 71.8EUR
OS VALORES FINAIS JÁ INCLUEM:
-DESCONTO VIP
-VAT (IVA)
-PORTES INCLUIDOS (para mim Lisboa)
*neste caso nao da pa fugir aos portes...
So7urno OK
nunoturbo OK 72€ OK enviado via emanuel
dariod-4d OK 71.8€ (por enviar)
emanuelae86 OK 75€ OK enviado
buda OK 72€ OK (pessoalmente)
crgod OK 71.8€ OK (pessoalmente, entregue, obrigado pelo burguer!)
RS1800 OK 71.8€ OK (pessoalmente)
RT OK 80.45€ ilhas OK enviado
rui machado (buda) OK 71.80€ OK (pessoalmente)
Ayrton_Senna OK 175,00 (+camberplates) OK enviado
10 kits magnecor 8.5mm !
ja mandei email para me confirmarem preço final total.. assim que tiver resposta começo a mandar pm's para o pessoal transferir o guito. (por favor coloquem detalhes para eu saber quem é quem qd for ao extracto lol)
tb não me esqueci da questão do kit ter 4 ou 5 cabos.
pff sejam pacientes vai demorar entre 2 a 3 semanas até os cabos chegarem a mim.
Última edição por so7urno em 21 out 2009, 16:09, editado 7 vezes no total.
-
- Propietários
- Mensagens: 704
- Registado: 29 mai 2009, 13:21
- Localização: Angra Do Heroismo
- Contacto:
- Ricardo M.
- active user
- Mensagens: 1161
- Registado: 24 mai 2009, 12:39
- Localização: Fânzeres - Gondomar
- Contacto:
-
- active user
- Mensagens: 966
- Registado: 12 ago 2009, 17:06
- Localização: Vila Nova de Gaia
- Contacto:
Corolla GTi 1.6 16v Rwd AE86 (E/c 4A-GE) 1984-87 45103 109,54 €
Corolla GTi 1.6 16v Fwd AE82 (E/c 4A-GE) 1983-86 45138 110,99 €
# Corolla GT 1.6 16v Fwd AE92 (E/c 4A-GE) 1987-88 45190 110,99 €
http://www.lugo.pt/tabela_magnecor.htm
Corolla GTi 1.6 16v Fwd AE82 (E/c 4A-GE) 1983-86 45138 110,99 €
# Corolla GT 1.6 16v Fwd AE92 (E/c 4A-GE) 1987-88 45190 110,99 €
http://www.lugo.pt/tabela_magnecor.htm
-
- Propietários
- Mensagens: 1718
- Registado: 11 ago 2009, 23:04
- Localização: Gondomar
- Contacto:
-
- active user
- Mensagens: 966
- Registado: 12 ago 2009, 17:06
- Localização: Vila Nova de Gaia
- Contacto:
http://www.magnecor.com/magnecor1/products.htm
Magnecor's KV85 Competition (8.5mm) and R-100 Racing (10mm) Ignition Cables feature Magnecor's exclusive 2.5mm high capacity Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a ferrimagnetic core. The insulating jacket is made entirely of Magnecor's exclusive TC-1500-HS high strength aerospace grade silicone rubber, and its single layer construction will prolong the jacket's insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources.
The KV85 8.5mm jacket has a service heat resistance of 600 degrees F (320 degrees C) and up to 1,000 degrees F (540 degrees C) for short burst 3 minutes. The R-100 10mm jacket has a service heat resistance of 700 degrees F (380 degrees C) and up to 1,200 degrees F (650 degrees C) for short burst 3 minutes. Even if limits are exceeded, the silicone rubber will retain its insulating ability until wires are removed from engine.
Magnecor Race Wires are primarily designed and constructed to be used in applications where it is essential to prevent the possibility of ignition wires compromising engine performance. Modern race engines, modified street engines and stock street engines which rely on electronic devices to control the function of either or both the ignition and fuel systems are prone to interference from all other spiral conductor ignition wires sold through performance parts outlets, none of which can provide proper suppression for EMI, particularly if a high-output ignition system is used.
We always recommend use of our Race Wires for any stock or modified late model street engine that is electronically managed, however most other modified or street engines can also use our Race Wires to improve ignition performance
Magnecor 8mm Electrosports 80 Ignition Cables
Original equipment replacement. Designed to improve original ignition system performance on street vehicles using either electronic engine management systems or carburetors. Conductor provides excellent RFI and EMI suppression to permanently eliminate the typical performance and fuel-wasting spark energy deterioration of OE and aftermarket carbon conductor wires. Also overcomes performance problems associated with poorly suppressed aftermarket spiral conductor wires on both modern and older engines. The conventional style insulating jacket consists of high dielectric strength silicone rubber insulation, fiberglass reinforcing braiding and a high temperature, high tear strength silicone rubber outer jacket. The flexibility and ruggedness of the cable allows it to be fitted into original 7mm cable holders. Ideal for use on heat-generating LPG (propane) gas conversion engines.
CONDUCTORS:
The above Magnecor cables feature versions of Magnecor's Metallic Inductance EMI Suppressed Conductors, specially constructed to best suit the applications for which the cables are designed. See specification sheets below for more detailed information.
Magnecor ELECTROSPORTS Series Ignition Cables are intended for use as factory replacement wires on both the most recent engines with computerized management systems and older engines with carburetors and/or mechanical fuel injection. Engines used in marine craft and commercial vehicles, as well as industrial stationary engines will also benefit from the use of these cables.
Magnecor can supply stock length replacement sets, individual leads in a variety of styles and lengths, universal sets and sets made to any length or style required by the customer. Either ignition cable can be ordered loose in any length, with boots, terminals and connectors if required.
Magnecor's KV85 Competition (8.5mm) and R-100 Racing (10mm) Ignition Cables feature Magnecor's exclusive 2.5mm high capacity Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a ferrimagnetic core. The insulating jacket is made entirely of Magnecor's exclusive TC-1500-HS high strength aerospace grade silicone rubber, and its single layer construction will prolong the jacket's insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources.
The KV85 8.5mm jacket has a service heat resistance of 600 degrees F (320 degrees C) and up to 1,000 degrees F (540 degrees C) for short burst 3 minutes. The R-100 10mm jacket has a service heat resistance of 700 degrees F (380 degrees C) and up to 1,200 degrees F (650 degrees C) for short burst 3 minutes. Even if limits are exceeded, the silicone rubber will retain its insulating ability until wires are removed from engine.
Magnecor Race Wires are primarily designed and constructed to be used in applications where it is essential to prevent the possibility of ignition wires compromising engine performance. Modern race engines, modified street engines and stock street engines which rely on electronic devices to control the function of either or both the ignition and fuel systems are prone to interference from all other spiral conductor ignition wires sold through performance parts outlets, none of which can provide proper suppression for EMI, particularly if a high-output ignition system is used.
We always recommend use of our Race Wires for any stock or modified late model street engine that is electronically managed, however most other modified or street engines can also use our Race Wires to improve ignition performance
Magnecor 8mm Electrosports 80 Ignition Cables
Original equipment replacement. Designed to improve original ignition system performance on street vehicles using either electronic engine management systems or carburetors. Conductor provides excellent RFI and EMI suppression to permanently eliminate the typical performance and fuel-wasting spark energy deterioration of OE and aftermarket carbon conductor wires. Also overcomes performance problems associated with poorly suppressed aftermarket spiral conductor wires on both modern and older engines. The conventional style insulating jacket consists of high dielectric strength silicone rubber insulation, fiberglass reinforcing braiding and a high temperature, high tear strength silicone rubber outer jacket. The flexibility and ruggedness of the cable allows it to be fitted into original 7mm cable holders. Ideal for use on heat-generating LPG (propane) gas conversion engines.
CONDUCTORS:
The above Magnecor cables feature versions of Magnecor's Metallic Inductance EMI Suppressed Conductors, specially constructed to best suit the applications for which the cables are designed. See specification sheets below for more detailed information.
Magnecor ELECTROSPORTS Series Ignition Cables are intended for use as factory replacement wires on both the most recent engines with computerized management systems and older engines with carburetors and/or mechanical fuel injection. Engines used in marine craft and commercial vehicles, as well as industrial stationary engines will also benefit from the use of these cables.
Magnecor can supply stock length replacement sets, individual leads in a variety of styles and lengths, universal sets and sets made to any length or style required by the customer. Either ignition cable can be ordered loose in any length, with boots, terminals and connectors if required.
elá este foi rápido :D
-para o preço minimo, basta que sejam pelo menos 5 kits, nao é preciso serem todos iguais (8.0mm ou 8.5mm)
-em relação aos portes como o preço ja é especial nao pode oferecer os portes... por isso tá no preço minimo mesmo.
-desde o momento da encomenda vai demorar entre 2 a 3 semanas a chegarem até mim. (pois é por encomenda nao tem em stock)
-para o preço minimo, basta que sejam pelo menos 5 kits, nao é preciso serem todos iguais (8.0mm ou 8.5mm)
-em relação aos portes como o preço ja é especial nao pode oferecer os portes... por isso tá no preço minimo mesmo.
-desde o momento da encomenda vai demorar entre 2 a 3 semanas a chegarem até mim. (pois é por encomenda nao tem em stock)
- Ricardo M.
- active user
- Mensagens: 1161
- Registado: 24 mai 2009, 12:39
- Localização: Fânzeres - Gondomar
- Contacto:
-
- Propietários
- Mensagens: 704
- Registado: 29 mai 2009, 13:21
- Localização: Angra Do Heroismo
- Contacto:
sim nao faz sentido nao ser. qualquer das formas confirmo na 2ª feira
entretanto... mais um comprador Rui RS1800 (ele está com um prob de password e nao consegue entrar aki no forum)
So7urno
nunoturbo
dariod-4d
emanuelae86
buda
crgod
RS1800
pessoal vão se manifestando, é que eu vou po Avante eu só devo voltar a net na 2ª feira e na 3ª devo tratar da encomenda.
aos compradores. enviem-me PM com nº tlm e\ou msn
em especial os que nao tenho contacto (nunoturbo; dariod e crgod) o resto acho que ja tenho :]
entretanto... mais um comprador Rui RS1800 (ele está com um prob de password e nao consegue entrar aki no forum)
So7urno
nunoturbo
dariod-4d
emanuelae86
buda
crgod
RS1800
pessoal vão se manifestando, é que eu vou po Avante eu só devo voltar a net na 2ª feira e na 3ª devo tratar da encomenda.
aos compradores. enviem-me PM com nº tlm e\ou msn
em especial os que nao tenho contacto (nunoturbo; dariod e crgod) o resto acho que ja tenho :]
-
- Propietários
- Mensagens: 1718
- Registado: 11 ago 2009, 23:04
- Localização: Gondomar
- Contacto:
So7urno
nunoturbo
dariod-4d
emanuelae86
buda
crgod
RS1800
RT
8 kits magnecor 8.5mm !
ja mandei email para me confirmarem preço final total.. assim que tiver resposta começo a mandar pm's para o pessoal transferir o guito. (por favor coloquem detalhes para eu saber quem é quem qd for ao extracto lol)
tb não me esqueci da questão do kit ter 4 ou 5 cabos.
pff sejam pacientes vai demorar entre 2 a 3 semanas até os cabos chegarem a mim.
nunoturbo
dariod-4d
emanuelae86
buda
crgod
RS1800
RT
8 kits magnecor 8.5mm !
ja mandei email para me confirmarem preço final total.. assim que tiver resposta começo a mandar pm's para o pessoal transferir o guito. (por favor coloquem detalhes para eu saber quem é quem qd for ao extracto lol)
tb não me esqueci da questão do kit ter 4 ou 5 cabos.
pff sejam pacientes vai demorar entre 2 a 3 semanas até os cabos chegarem a mim.
Quem está ligado:
Utilizadores neste fórum: Ahrefs [Bot] e 0 visitante